Welcome to Wausau Coated. Skip directly to: Main Content, Main Navigation.

    • 2.6 mil White Polypropylene/AT-2060/44#PK

      Catalog # W018510
      FACESTOCK DESCRIPTION: 2.6 MIL WHITE POLYPROPYLENE OPTIMIZED FOR HP INDIGO PRESSES
      A white polypropylene film top coated and optimized for HP Indigo Presses.  It is very durable with high opacity and is biaxially oriented with good stiffness for conversion and automatic label dispensing. 
             
        Caliper, mils   2.6
        Yield, sq. in./lb.   15,000
        Opacity, %   88
        Gloss (45°), %   70
        Tensile Strength, psi MD / TD   13,100 / 27,700
        Tensile Elongation, %, MD / TD   200 / 50
        Stiffness, Gurley, mgf, MD / TD   22 / 42
        Dimensional Stability, %, MD / TD   -5.0 / -5.0
        Regulatory Compliances   CONEG, ASTM 963a Child Toy Safety, REACH, RoHS, CPSIA, Title IV ozone depleting, and California Proposition 65
             
      ADHESIVE DESCRIPTION: AT-2060    
      An aggressive all-temperature emulsion acrylic permanent adhesive with good room temperature and excellent cold temperatre performance.  Exhibits high initial tack and adhesion, even on most textured and hard-to-label substrates, including corrugated.  Designed with good die-cutting and stripping properties.
             
        Type   All-temperature Permanent
        Classification   Emulsion Acrylic
        pH   Neutral
        Minimum Application Temp.   -20ºF
        Service Temperature Range   -65°F to +200°F
        Regulatory Compliances   Acute Oral Toxicity 16 CFR 1500.3, Primary Skin Irritant 16 CFR 1500.41, Primary Eye Irritant 16 CFR 1500.42 Indirect Food 21 CFR 175.105, CONEG, and CPSIA 2008
             
      LINER DESCRIPTION: 44# PK    
      A polycoated brown kraft liner with superior die-cutting and stripping properties.  Designed for high-speed label dispensing and is recommended for roll-to-roll applications.
             
        Basis Weight (25 x 38 / 500) lbs.   48# +/- 10%
        Caliper, mils   3.2 +/- 10%
             
             
             
             
      All product specifications are for informational use only. Each customer and/or end user should determine the suitability of any product for their particular application. The above specifications are based on typical values and most current information. Specific products listed were current at the time of publication, however, all raw materials are subject to change.