| FACESTOCK DESCRIPTION: 2.6 MIL WHITE POLYPROPYLENE OPTIMIZED FOR HP INDIGO PRESSES |
A white polypropylene film top coated and optimized for HP Indigo Presses. It is very durable with high opacity and is biaxially oriented with good stiffness for conversion and automatic label dispensing.
|
| |
|
|
|
|
| |
Caliper, mils |
|
2.6 |
|
| |
Yield, sq. in./lb. |
|
15,000 |
|
| |
Opacity, % |
|
88 |
|
| |
Gloss (45°), % |
|
70 |
|
| |
Tensile Strength, psi MD / TD |
|
13,100 / 27,700 |
|
| |
Tensile Elongation, %, MD / TD |
|
200 / 50 |
|
| |
Stiffness, Gurley, mgf, MD / TD |
|
22 / 42 |
|
| |
Dimensional Stability, %, MD / TD |
|
-5.0 / -5.0 |
|
| |
Regulatory Compliances |
|
CONEG, ASTM 963a Child Toy Safety, REACH, RoHS, CPSIA, Title IV ozone depleting, and California Proposition 65 |
|
| |
|
|
|
|
| ADHESIVE DESCRIPTION: F-590 |
|
|
|
A very aggressive rubber based freezer permanent adhesive exhibiting high initial tack and very good adhesion to a wide variety of packaging materials and films. F-590 will adhere to a frosty surface depending upon the substrate and the amount of frost and/or free moisture present. Pretesting is recommended to determine end-use applicability.
|
|
| |
|
|
|
|
| |
Type |
|
Freezer Permanent |
|
| |
Classification |
|
Rubber Based |
|
| |
Minimum Application Temp. |
|
-15°F |
|
| |
Service Temperature Range |
|
-40°F to +130°F |
|
| |
Regulatory Compliances |
|
Indirect Food 21 CFR 175.105, California Proposition 65, CONEG, RoHS, REACH and Natural Rubber Latex Free |
|
| |
|
|
|
|
| LINER DESCRIPTION: 40# SC |
|
|
|
| A supercalendered bleached kraft liner. Superior die-cutting and stripping properties. Recommended for roll-to-roll applications. Good back printability. |
| |
|
|
|
|
| |
Basis Weight (25 x 38 / 500) lbs. |
|
44.7 |
|
| |
Caliper, mils |
|
2.5 |
|
| |
Brightness, % |
|
78 |
|
| |
Opacity, % |
|
65 |
|
| |
Tensile, lbs., MD / CD |
|
34 / 22 |
|
| |
Tear, g, MD / CD |
|
32 / 34 |
|
| |
Gloss, 75° |
|
48 |
|
| |
Regulatory Compliances |
|
Indirect Food 21 CFR 176.170, and RoHS |
|
| |
|
|
|
|
All product specifications are for informational use only. Each customer and/or end user should determine the suitability of any product for their particular application . The above specifications are based on typical values and most current information. Specific products listed were current at the time of publication, however, all raw materials are subject to change.
|