| FACESTOCK DESCRIPTION: 2 MIL CLEAR TOP COATED METALIZED POLYPROPYLENE OPTIMIZED FOR HP INDIGO PRESSES |
| Biaxially oriented polypropylene film with a brilliant metalized appearance. It is top coated and optimized for HP Indigo Presses. It has good stiffness for automatic labeling applications. Great facestock for pharmaceutical, beverage, and health and beauty labels. |
| |
|
|
|
|
| |
Caliper, mils |
|
2.0 |
|
| |
Yield, sq. in./lb. |
|
15,000 |
|
| |
Tensile Strength, psi, MD / TD |
|
21,000 / 38,000 |
|
| |
Tensile Elongation, %, MD / TD |
|
180 / 55 |
|
| |
Dimensional Stability @ 275°F , MD / TD |
|
6 / 5 |
|
| |
|
|
|
|
| ADHESIVE DESCRIPTION: AT-2060 |
|
|
|
An aggressive all-temperature emulsion acrylic permanent adhesive with good room temperature and excellent cold temperatre performance. Exhibits high initial tack and adhesion, even on most textured and hard-to-label substrates, including corrugated. Designed with good die-cutting and stripping properties.
|
| |
|
|
|
|
| |
Type |
|
All-temperature Permanent |
|
| |
Classification |
|
Emulsion Acrylic |
|
| |
pH |
|
Neutral |
|
| |
Minimum Application Temp. |
|
-20ºF |
|
| |
Service Temperature Range |
|
-65°F to +200°F |
|
| |
Regulatory Compliances |
|
Acute Oral Toxicity 16 CFR 1500.3, Primary Skin Irritant 16 CFR 1500.41, Primary Eye Irritant 16 CFR 1500.42 Indirect Food 21 CFR 175.105, CONEG, and CPSIA 2008 |
|
| |
|
|
|
|
| LINER DESCRIPTION: 50# SC |
|
|
|
| A supercalendered bleached kraft liner. Superior die-cutting and stripping properties. Recommended for roll-to-sheet or roll-to-fanfold applications. Good back printability. |
| |
|
|
|
|
| |
Basis Weight (25 x 38 / 500) lbs. |
|
57.5 |
|
| |
Caliper, mils |
|
3.2 |
|
| |
Brightness, % |
|
78 |
|
| |
Opacity, % |
|
75 |
|
| |
Tensile, lbs., MD / CD |
|
43 / 27 |
|
| |
Tear, g, MD / CD |
|
44 / 48 |
|
| |
Parker Print Surf, F, ppsu |
|
2.00 |
|
| |
Gloss |
|
48 |
|
| |
Regulatory Compliances |
|
Indirect Food 21 CFR 176.170, ASTM F-963a Toy Safety, and CONEG,
|
|
| |
|
|
|
|
| All product specifications are for informational use only. Each customer and/or end user should determine the suitability of any product for their particular application. The above specifications are based on typical values and most current information. Specific products listed were current at the time of publication, however, all raw materials are subject to change. |