| FACESTOCK DESCRIPTION: ULTRATHERM® SL DIRECT THERMAL |
| Non-topcoated, direct thermal facestock with a bright surface that produces sharp images. Designed for short-term labels that are not exposed to solvents, water, oils, fats, or like substances. Typical applications include bakery and deli labels, light industrial labeling, price, weight, and distribution labels. |
|
| |
|
|
|
|
| |
Basis Weight (25 x 38 / 500) lbs. |
|
52 |
|
| |
Caliper, mils |
|
3.3 ± .30 |
|
| |
Tear, g, MD/CD |
|
43 / 54 |
|
| |
Sheffield Smoothness |
|
< 25 |
|
| |
Brightness |
|
> 85.0 |
|
| |
Stiffness MD / CD (mg) |
|
70 / 50 |
|
| |
|
|
|
|
| ADHESIVE DESCRIPTION: PCT-410 |
|
| A cold temperature emulsion acrylic permanent which exhibits high initial tack and very good adhesion to a variety of substrates including corrugated, rigid plastics, films, glass, and painted metal substrates. It offers good die-cutting and stripping characteristics. It is not recommended for water immersion. |
| |
|
|
|
|
| |
Type |
|
Cold Temperature Permanent |
|
| |
Classification |
|
Emulsion Acrylic |
|
| |
Regulatory Compliances |
|
FDA 21 CFR 175.105 for incidental food contact, CONEG, Heavy Metals, ASTM 963a Child Toy Safety, Acute Oral Toxicity, Primary Dermal Irritant, Primary Eye Irritant, and NAFTA. |
|
| |
pH |
|
Alkaline |
|
| |
Minimum Application Temp. |
|
+25°F |
|
| |
Service Temperature Range |
|
-10°F to +200°F |
|
| |
|
|
|
|
| LINER DESCRIPTION: 40# LINER |
|
| A liner designed for thermal, film and specialty niches requiring a superior die cutting surface. |
|
| |
|
|
|
|
| |
Basis Weight (25 x 38 / 500) lbs. |
|
48.4 |
|
| |
Caliper, mils |
|
2.44 |
|
| |
Gloss, 75°, F / W |
|
65 / 52 |
|
| |
Opacity, % |
|
57 |
|
| |
Tensile, lbs./in., MD/CD |
|
36 / 20 |
|
| |
Tear, gm, MD/CD |
|
37 / 39 |
|
| |
Regulatory Compliances |
|
FDA 21 CFR 176.170 and 176.180, NAFTA, CONEG, Heavy Metals, ASTM F963a Child Toy Safety, and California Clean Water (Prop. 65). |
|
| |
|
|
|
|
| All product specifications are for informational use only. Each customer and/or end user should determine the suitability of any product for their particular application . The above specifications are based on typical values and most current information. |
|