| FACESTOCK DESCRIPTION: 2 MIL CLEAR TC POLYPROPYLENE OPTIMIZED FOR HP INDIGO PRESSES |
Biaxially oriented clear polypropylene film with good stiffness and flatness properties. Top coated and optimized for HP Indigo Presses.
|
| |
|
|
|
|
| |
Caliper, mils |
|
2.0 |
|
| |
Microns |
|
50 |
|
| |
Yield, sq. in./lb. |
|
15,600 |
|
| |
Haze, % |
|
1.5 - 3.0 |
|
| |
Tensile Strength, lbs./sq. in., MD/TD |
|
20,000 / 32,000 |
|
| |
Elongation, % |
|
140 / 60 |
|
| |
Shrinkage, MD / TD, % |
|
5 / 3 (max) |
|
| |
|
|
|
|
| ADHESIVE DESCRIPTION:PCT-2242 |
|
|
|
| A cold temperature emulsion acrylic permanent which exhibits moderate initial tack to a variety of substrates. Adhesion to rigid plastics, film, glass, and painted metals is good. Die-cuts cleanly. Designed for laser applications and is a good choice for roll-to-sheet applications. |
| |
|
|
|
|
| |
Type |
|
Cold Temperature Permanent |
|
| |
Classification |
|
Emulsion Acrylic |
|
| |
pH |
|
Alkaline |
|
| |
Minimum Application Temp. |
|
+35°F |
|
| |
Service Temperature Range |
|
-10°F to +200°F |
|
| |
Regulatory Compliances |
|
FDA 21 CFR 175.105 for incidental food contact, CONEG, Heavy Metals, ASTM 963a Child Toy Safety, Acute Oral Toxicity, Primary Dermal Irritant, Primary Eye Irritant, and NAFTA. |
|
| |
|
|
|
|
| LINER DESCRIPTION: 40# SC LINER |
|
|
|
| A supercalendered bleached kraft liner. Superior die-cutting and stripping properties. Recommended for roll-to-roll applications. Good back printability. |
| |
|
|
|
|
| |
Basis Weight (25 x 38 / 500) lbs. |
|
44.7 |
|
| |
Caliper, mils |
|
2.5 |
|
| |
Brightness, % |
|
78 |
|
| |
Opacity, % |
|
65 |
|
| |
Tensile, lbs./in., MD / CD |
|
34 / 22 |
|
| |
Tear, G, MD / CD |
|
32 / 34 |
|
| |
Gloss, 75° |
|
48 |
|
| |
Regulatory Compliances |
|
FDA 21 CFR 176.170 for incidental food contact, California Clean Water/Proposition 65, and NAFTA. Lignin free. |
|
| |
|
|
|
|
| |
|
|
|
|
All product specifications are for informational use only. Each customer and/or end user should determine the suitability of any product for their particular application . The above specifications are based on typical values and most current information. Specific products listed were current at the time of publication, however, all raw materials are subject to change.
|
|