| FACESTOCK DESCRIPTION: 60# SEMI GLOSS OPTIMIZED FOR HP INDIGO PRESSES |
|
| High quality, high brightness, highly opaque, semi gloss facestock with excellent gloss level. Top coated and optimized for HP Indigo Presses. Base sheet contains archival properties, is elemental chlorine free and lignin free. It features excellent ink anchorage and high strength for die cutting and matrix stripping. |
| |
|
|
|
|
| |
Basis Weight (25 x 38 / 500) lbs. |
|
60 |
|
| |
Caliper, mils |
|
3.0 |
|
| |
GSM |
|
88.8 |
|
| |
Brightness, % |
|
90 |
|
| |
Opacity, % |
|
91 |
|
| |
Gloss |
|
71 |
|
| |
Smoothness, PPS, F/W |
|
0.79/0.72 |
|
| |
Tear, g, MD / CD |
|
30 / 30 |
|
| |
Tensile, lbs., MD / CD |
|
35 / 17 |
|
| |
pH |
|
Alkaline |
|
| |
Regulatory Compliances |
|
ASTM F963-96a Toy Safety, California Proposition 65, CONEG, and RoHS |
|
| |
|
|
|
|
| ADHESIVE DESCRIPTION: R-201 |
|
|
|
| An aggressive emulsion acrylic removable with good initial tack and moderate adhesion on most substrates. It has repositionability on some substrates for up to 24 hours. On some smooth surfaces, R-201 may grow to semi-permanency. As always, pretesting is recommended to determine suitability for a particular end-use application. |
|
| |
|
|
|
|
| |
Type |
|
Removable |
|
| |
Classification |
|
Emulsion Acrylic |
|
| |
pH |
|
Alkaline |
|
| |
Minimum Application Temp. |
|
+40°F |
|
| |
Service Temperature Range |
|
0°F to +175°F |
|
| |
Regulatory Compliances |
|
Indirect Food 21 CFR 175.105 and RoHS |
|
| |
|
|
|
|
| LINER DESCRIPTION: 40# SC |
|
|
|
| A supercalendered bleached kraft liner. Superior die-cutting and stripping properties. Recommended for roll-to-roll applications. Good back printability. |
|
| |
|
|
|
|
| |
Basis Weight (25 x 38 / 500) lbs. |
|
44.7 |
|
| |
Caliper, mils |
|
2.5 |
|
| |
Brightness, % |
|
78 |
|
| |
Opacity, % |
|
65 |
|
| |
Tensile, lbs., MD / CD |
|
34 / 22 |
|
| |
Tear, g, MD / CD |
|
32 / 34 |
|
| |
Gloss, 75° |
|
48 |
|
| |
Regulatory Compliances |
|
Indirect Food 21 CFR 176.170, and RoHS |
|
| |
|
|
|
|
| All product specifications are for informational use only. Each customer and/or end user should determine the suitability of any product for their particular application. The above specifications are based on typical values and most current information. Specific products listed were current at the time of publication, however all raw materials are subject to change. |
|