| FACESTOCK DESCRIPTION: 2 MIL CLEAR POLYPROPYLENE OPTIMIZED FOR HP INDIGO PRESSES |
| Biaxially oriented polypropylene, non-cavitated film with a "no label" look (when manufactured with a clear adhesive). This film has high machine direction stiffness and tensile strength, which produces excellent matrix stripping and high speed label dispensing properties. This film is top coated and optimized for HP Indigo Presses. |
| |
|
|
|
|
| |
Caliper, mils |
|
2.0 |
|
| |
Yield, in2./lb. |
|
15,100 |
|
| |
Tensile, lbs/in², MD / TD |
|
30,500 / 24,500 |
|
| |
Elongation at break, % MD / TD |
|
85 / 105 |
|
| |
Gloss, Gardner (45°), % |
|
90 |
|
| |
Haze, wide angle |
|
<3.5% |
|
| |
Dimensional Stability, MD/TD, % |
|
3.0 / 0 |
|
| |
60 Seconds at 248o |
|
|
|
| |
Regulatory Compliances |
|
CONEG, Toy Safety - ASTM F963 and HP indigo Certified |
|
| |
|
|
|
|
| ADHESIVE DESCRIPTION:CP-300 |
|
|
|
| A clear permanent emulsion acrylic adhesive with excellent clarity, good initial tack, and good adhesion to a variety of substrates. Excellent choice for personal care labels, beverage bottles (both glass and plastic), and other consumer packaging applications. |
| |
|
|
|
|
| |
Type |
|
Clear Permanent |
|
| |
Classification |
|
Emulsion Acrylic |
|
| |
Minimum Application Temp. |
|
+40°F |
|
| |
Service Temperature Range |
|
-10°F to +250°F |
|
| |
Regulatory Compliances |
|
CONEG, NAFTA, CPSIA, Free from Class I or Class II Ozone, Depleting Substances, RoHS, and 21 CFR 175.105 (a)(b) |
|
| |
|
|
|
|
| LINER DESCRIPTION: 1.2 MIL CLEAR POLYESTER |
|
| A clear polyester film liner with high strength and durability. Typically used for high speed automatic roll-to-roll applications. |
| |
|
|
|
|
| |
Caliper, mils |
|
1.2 |
|
| |
Gauge |
|
118 |
|
| |
Gloss, ASTM D523 |
|
165 |
|
| |
Elongation at break, MD / TD, % |
|
130 / 120 |
|
| |
Tensile Strength, psi, MD / TD |
|
37,000 / 34,000 |
|
| |
Haze, % |
|
4.20% |
|
| |
Shrinkage at 190°C @ 30 min , MD / TD, % |
|
2.3 / -0.15 |
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| All product specifications are for informational use only. Each customer and/or end user should determine the suitability of any product for their particular application . The above specifications are based on typical values and most current information. Specific products listed were current at the time of publication, however, all raw materials are subject to change. |