Welcome to Wausau Coated. Skip directly to: Main Content, Main Navigation.
    • 3 mil White Inkjet Polypropylene

      Catalog # W014228
      FACESTOCK DESCRIPTION: 3.2 MIL WHITE INKJET COATED POLYPROPYLENE  
      This face sheet is specifically engineered to perform in inkjet printing applications. Also provides excellent resistance to
      chemicals and moisture.      
               
        Basis Weight (25 x 38 / 500) lbs.   48.5  
        Caliper, mils   3.2  
        Tensile, lbs., MD / CD   20.1 / 53  
        Tear, g, MD / CD   24 / 12  
        Opacity, %   90  
               
      ADHESIVE DESCRIPTION:  PCT-241      
      Cold temperature emulsion acrylic permanent which exhibits high initial tack and very good adhesion to a variety of substrates including corrugated, rigid plastics, films, glass, and painted metal substrates.  It offers good die-cutting and stripping characteristics.  It is not recommended for water immersion.
               
        Type   Cold Temperature Permanent  
        Classification   Emulsion Acrylic  
        pH   Alkaline  
        Minimum Application Temp.   +25°F  
        Service Temperature Range   -10°F to +200°F  
        Regulatory Compliances   Acute Oral Toxicity 16 CFR 1500.3, Primary Skin Irritant 16 CRF 1500.41, Primary Eye Irritant 16 CFR 1500.42, Indirect Food 21 CFR 175.105, ASTM F963-96a Toy Safety, CONEG, RoHS, & REACH   
               
      LINER DESCRIPTION: 40# SC LINER      
      A supercalendered bleached kraft liner.  Superior die-cutting and stripping properties.  Recommended for roll-to-roll applications.  Good back printability.
               
        Basis Weight (25 x 38 / 500) lbs.   44.7  
        Caliper, mils   2.5  
        Brightness, %   78  
        Opacity, %   65  
        Tensile, lbs., MD / CD   34 / 22  
        Tear, g, MD / CD   32 / 34  
        Gloss, 75°   48  
        Regulatory Compliances   Indirect Food 21 CFR 176.170, and RoHS  
               
               
               
               
      All product specifications are for informational use only. Each customer and/or end user should determine the suitability of any product for their particular application . The above specifications are based on typical values and most current information. Specific products listed were current at the time of publication, however, all raw materials are subject to change.