Welcome to Wausau Coated. Skip directly to: Main Content, Main Navigation.

    • High Gloss Die Cut Labels

      Catalog # DPI400DC-3

      High gloss cast coated paper engineered to run on today's digital presses. Products are compatible on HP Indigo, Kodak Nexpress, Xerox iGen3, and many more! Large 12" x 18" sheet sizes will optimize the speed of the press. The following itmes are in stock and ready to ship.

      FACESTOCK DESCRIPTION: 60# HIGH GLOSS
      A blue-white shade and mirror-smooth finish with excellent ink receptivity. Suitable for letterpress, offset, gravure, and water and UV flexographic printing applications.
      Basis Weight (25 x 38 / 500) lbs. 59.4
      Caliper, mils 3.5
      Tensile, lbs., MD / CD 39 / 18
      Tear, g, MD / CD 41 / 42
      Brightness, % 83*
      Opacity, % 93
      Gloss, %, Min. 87
      pH Slightly Acidic
      *Typical Run Value
      ADHESIVE DESCRIPTION: PERMANENT
      A cold temperature emulsion acrylic permanent which exhibits good initial tack to a variety of substrates. Adhesion to rigid plastics, film, glass, and painted metals is good. Die-cuts cleanly. Designed for laser applications and is a good choice for roll-to-sheet applications.
      Type Cold Temperature Permanent
      Classification Emulsion Acrylic
      Regulatory Compliances FDA 21 CFR 175.105 for incidental food contact, CONEG,
      Heavy Metals, ASTM 963a Child Toy Safety, Acute Oral
      Toxicity, Primary Dermal Irritant, Primary Eye Irritant,
      and NAFTA.
      pH Alkaline
      Minimum Application Temp. +35°F
      Service Temperature Range -10°F to +200°F
      LINER DESCRIPTION: 80# LAYFLAT LINER
      Dimensionally stable clay-coated bleached kraft liner designed for roll-to-sheet applications.
      Basis Weight (25 x 38/500) lbs. 71.8
      Caliper, mils 4.2
      Brightness, % 79
      Opacity, % 91
      Tensile, lbs./in., MD/CD 57/25
      Tear, G, MD/CD 60/77
      Regulatory Compliance Elemental Chlorine Free
      All product specifications are for informational use only. Each customer and/or end user should determine the suitability of any product for their particular application . The above specifications are based on typical values and most current information.