| FACESTOCK DESCRIPTION: 70# RECYCLED NATURAL FELT WITH 30% PCW OPTIMIZED FOR HP INDIGO PRESSES |
| 70# Recycled Natural Felt features a distinct texture, high opacity and excellent ink holdout. Top coated and optimized for HP Indigo Presses. This facestock also contains 30% post consumer waste content making it an excellent choice for eco-friendly applications. This sheet is also manufactured with 100% wind-generated energy. It's manufactured with "wet strength" properties to increase performance in moist environments. |
| |
|
|
|
|
| |
Basis Weight (25 x 38 / 500) lbs. |
|
69.9 |
|
| |
Caliper, mils |
|
5.85 |
|
| |
GSM |
|
103.4 |
|
| |
Tear, g, MD / CD |
|
73/80 |
|
| |
Recycled Content, % |
|
30 |
|
| |
PCW, % |
|
30 |
|
| |
|
|
|
|
| ADHESIVE DESCRIPTION: F-580 |
|
|
|
| An aggressive emulsion acrylic freezer permanent exhibiting excellent adhesion to most textured and hard-to-label substrates. Has high initial tack and adhesion even when applied at low temperatures. It has good plasticizer, UV, and solvent resistance. Although soft, it has good die-cutting and stripping characteristics. End use testing is recommended. |
| |
|
|
|
|
| |
Type |
|
Freezer Permanent |
|
| |
Classification |
|
Emulsion Acrylic |
|
| |
pH |
|
Alkaline |
|
| |
Minimum Application Temp. |
|
-20°F |
|
| |
Service Temperature Range |
|
-30°F to +175°F |
|
| |
Regulatory Compliances |
|
Acute Oral Toxicity 16 CFR 1500.3, Primary Skin Irritant 16 CFR 1500.41, Primary Eye Irritant 16 CFR 1500.42, Indirect Food 21 CFR 175.105, ASTM F963-96a Toy Safety, CONEG, RoHS, & REACH |
|
| |
|
|
|
|
| LINER DESCRIPTION: 44# PK |
|
|
|
| A polycoated brown kraft liner with superior die-cutting and stripping properties. Designed for high-speed label dispensing and is recommended for roll-to-roll applications. |
|
| |
|
|
|
|
| |
Basis Weight (25 x 38 / 500) lbs. |
|
48# +/- 10% |
|
| |
Caliper, mils |
|
3.2 +/- 10% |
|
| |
Regulatory Compliances |
|
California Proposition 65, CONEG, RoHS and REACH |
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| All product specifications are for informational use only. Each customer and/or end user should determine the suitability of any product for their particular application. The above specifications are based on typical values and most current information. Specific products listed were current at the time of publication, however all raw materials are subject to change. |