W020558

2.6 Mil White Polypropylene Optimized For HP Indigo Presses / i8308 / 40# SC

2.6 Mil White Polypropylene Optimized For HP Indigo Presses

A white polypropylene film top coated and optimized for HP Indigo Presses. It is very durable with high opacity and is biaxially oriented with good stiffness for conversion and automatic label dispensing.

Caliper	2.6 mils
Yield	15,000 sq. in/lb
Opacity	88 %
Tensile Strength, MD / TD	13,100 / 27,700 psi
Tensile Elongation, MD / TD	200 / 50 %
Stiffness, Gurley, MD / TD	22 / 42 mg
Dimensional Stability, MD / TD	-5.0 / -5.0 %
Regulatory Compliances	California Proposition 65, RoHS, REACH, Dodd-Frank Legislation, Lead Free

i8308

i8308 is an ultra-aggressive permanent designed for difficult-to-label surfaces. It offers excellent initial tack and ultimate adhesion to a variety of substrates. i8308 is UV resistant, water resistant, and offers some solvent resistance.

Type	High Performance Acrylic
Classification	Acrylic
pH	Slightly Acidic
Minimum Application Temp.	20 °F
Service Temperature Range	-20 to +300 °F
Regulatory Compliances	California Proposition 65, CONEG, Natural Rubber Latex Free, Primary Skin Irritant 16 CFR 1500.41, REACH, RoHS, FDA 21 CFR 175.105, FDA 21 CFR 175.125 Table 2 D-G, FDA 21 CFR 176.180

40# SC

A supercalendered bleached liner. Superior die-cutting and stripping properties. Recommended for roll-to-roll applications. Good back printability.

Basis Weight (25 x 38 / 500)	42 lbs.
Caliper	2.5 mils